CHECK OF WIRING HARNESS BETWEEN CONTROLLER AND BULB
If any of the check items below are found, replace the wiring harness between the controller and the bulb.
| WARNING | If the wiring harness between the controller and the bulb is damaged, always replace it. Attempting to repair the wiring harness may cause a melted harness wire, or may result in a burn or death due to an electric shock by high voltage. |
| Items to be checked | Why the controller should be replaced |
|---|---|
| Wiring harness shield damaged | Abnormal noise may cause. |
| Damaged connector (chipped or cracked plastics, or deformed terminal) | The damaged part(s) may cause poor connection or short circuit. |
CONTROLLER HARNESS REPLACEMENT