Home ReviewsRefund
Home/Mitsubishi/Lancer/Mitsubishi Lancer X facelift (2011-2015)/Repair manual/Engine Mechanical - 2.0L Turbo - Lancer: Removal & Installation/>> A << ENGINE ASSEMBLY/ENGINE MOUNTING BRACKET INSTALLATION
Contents Wiring diagrams Section: Engine Mechanical - 2.0L Turbo - Lancer: Removal & Installation All sections

>> A << ENGINE ASSEMBLY/ENGINE MOUNTING BRACKET INSTALLATION Mitsubishi Lancer X facelift

Engine Mechanical - 2.0L Turbo - Lancer: Removal & Installation ~132 words

>> A << ENGINE ASSEMBLY/ENGINE MOUNTING BRACKET INSTALLATION

  1. Place the engine assembly below the lifted vehicle.
  2. Install the engine assembly, being careful not to pinch the cables, hoses, or wiring harness connectors.
  3. Set special tool MB991454 and a chain block to the engine assembly. CAUTION: When supporting the engine assembly with a garage jack, be careful not to deform the engine oil pan.
  4. Place a garage jack against the engine oil pan with a piece of wood in between, and install the engine mounting bracket while adjusting the position of the engine.
  5. Remove the chain block.
  6. Install special tool MB991928 or MB991895 which is used during installation of transaxle assembly to hold the engine assembly (Refer to «TRANSFER ASSEMBLY»(ref-592574-S35511704602014011000000) ).
  7. Remove the garage jack.