INITIALIZATION PROCEDURE
- Move the selector lever to the "P" range and turn the ignition switch to the "LOCK" (OFF) position. Then, connect the scan tool to the data link connector.
- Turn the ignition switch to the "ON" position, and then move the selector lever to the "R" range.
- Depress the accelerator pedal more than half while depressing the brake pedal. (Engine is not running.) Using the scan tool, execute the clear DTC function for the CVT ECU (even if no codes are set).
Note. Performing initialization of the learned value will also erase the diagnostic trouble code.
After initialization, the TCM does not have any learned value. This may degrade the shifting operation quality. The learning procedure is described below.