FASTENER TIGHTENING SPECIFICATIONS
| Item | Specification |
|---|---|
| Lower arm assembly | |
| Lower arm to crossmember connection bolt (Front) | 110 ± 11 N.m (81 ± 8 ft-lb) |
| Lower arm to crossmember connection nut (Rear) | 110 ± 11 N.m (81 ± 8 ft-lb) |
| Lower arm to knuckle connection nut | 71 ± 10 N.m (53 ± 7 ft-lb) |
| Lower arm to stabilizer link bracket connection bolt | 39 ± 5 N.m (29 ± 4 ft-lb) |
| Stabilizer bar | |
| Stabilizer fixture bolt | 31 ± 4 N.m (23 ± 3 ft-lb) |
| Stabilizer link bracket to Lower arm connection bolt | 39 ± 5 N.m (29 ± 4 ft-lb) |
| Stabilizer to stabilizer link connection nut | 39 ± 6 N.m (29 ± 4 ft-lb) |
| Stabilizer bracket to stabilizer link connection nut | 39 ± 6 N.m (29 ± 4 ft-lb) |
| Strut assembly | |
| Strut assembly self-locking nut | 61 ± 9 N.m (45 ± 7 ft-lb) |
| Strut assembly to body connection nut | 45 ± 7 N.m (33 ± 5 ft-lb) |
| Strut assembly to knuckle connection nut | 110 ± 11 N.m (81 ± 8 ft-lb) |
| Wheel speed sensor clamp nut | 13 ± 2 N.m (111 ± 22 in-lb) |
| Strut assembly to break hose bracket connection nut | 13 ± 2 N.m (111 ± 22 in-lb) |
FASTENER TIGHTENING SPECIFICATIONS
SERVICE SPECIFICATIONS
| Item | Specification | |
|---|---|---|
| Toe-in mm (in) | 0 ± 2 (0 ± 0.07) | |
| Steering angle | Inner wheel | 33°10' ± 1°30' |
| Outer wheel (reference) | 28°10' | |
| Camber | 1° 00' ± 30' (Left/right deviation within 30') | |
| Caster | 4° 25' ± 30' (Left/right deviation within 30' | |
| Kingpin inclination | 13°50' ± 1° 30' | |
| Lower arm ball joint breakaway torque N.m (in-lb) | 3.4 or less (29 or less) | |
| Stabilizer link ball joint turning torque N.m (in-lb) | Within 10 to 30°C (50 to 86°F) | 0.2 - 2.0 (1.7 - 17) |
| Not within 10 to 30°C (50 to 86°F) | {0.2 - 5.0 (1.7 - 44) | |
GENERAL SPECIFICATIONS