<< A >> SUN VISOR HOLDER REMOVAL
Insert special tool MB990784 into sides claws of the sun visor holder through the both sides of the sun visor holder to remove the hinges.
Scheme 9
<< B >> HEADLINING REMOVAL
Bend the headlining to remove from the front passenger's door.
Scheme 10
- Disengage the claw A and lower the cover toward arrow 1 direction.
- Push the claw B toward arrow 2 direction to unlock, and pull out the mirror toward arrow 3 direction.
Scheme 11
Scheme 12
- Temporarily tighten the nuts and bolts in all mounting locations shown in the illustration with no load applied to the front seat cushion and check the operation of the seat slide.
- Tighten the nuts and bolts in all mounting locations to the specified torque.
Scheme 13
Scheme 14
>>A<< INSTALLATION OF REAR SEATBACK ASSEMBLY
Press the rear seatback assembly in the direction shown in the illustration and fit the attachment wire into the hook securely to install the rear seatback assembly.
Scheme 15
>>B<< INSTALLATION OF REAR SEAT CUSHION ASSEMBLY
Fit the rear seat cushion into the rear seat hook securely.
Scheme 16
Scheme 17
REMOVAL AND INSTALLATION
| CAUTION | SRS: Before removing and installing the seat belts with pre-tensioner, refer to AIR BAG RESTRAINT SYSTEMS article. |
