Dimmer Automatic Reset Function
The column switch (column ECU) resets the dimmer switch and prevents the high beam from lighting up when turning on the headlight again if the headlight switch is put in the OFF position while the high beam of the headlight is on (including the instance when the dimmer switch is erroneously put in the ON state upon passing operations) and resets the dimmer switch. (Scheme 38)
Scheme 38
Headlight Dimmer Switch Automatic Resetting Function
This function allows the dimmer switch to be reset to the low-beam position whenever the headlight switch is turned to the ON position.
Turn-Signal Light
When the ignition switch is turned to the "ON" position and turn-signal light switch is placed in the ON position for right or left turn-signaling, the system generates turn-signal light drive signals (flashing signals). The system also notifies of a blown turn-signal light bulb by shortening the flashing intervals of the corresponding indicator light.