RIDING HEIGHT ADJUSTMENT
Note. Prior to performing wheel alignment, perform preliminary visual and mechanical inspection of wheels, tires and suspension components. See PRE-ALIGNMENT INSTRUCTIONS in WHEEL ALIGNMENT THEORY & OPERATION article in GENERAL INFORMATION.
Note. On vehicles with electronic chassis controls, ensure all systems are functional before attempting to adjust riding height or wheel alignment. See appropriate ELECTRONIC article under SUSPENSION.
- Before adjusting wheel alignment, visually inspect vehicle. Remove any heavy items from passenger and luggage compartments. Ensure tires are properly inflated and vehicle is level. Bounce vehicle several times, and allow suspension to settle.
- Check riding height from front to rear and from side to side. If riding height is not as specified on Montero and Montero Sport, adjust torsion bar anchor arm nut until correct height is obtained. See «RIDING HEIGHT SPECIFICATIONS (FRONT)»(ref-62262-S08504658622001100400000) table. On all other models, riding height for left and right sides of vehicle should not vary more than 1.0" (25.4 mm). If riding height is not within specification, check and repair suspension before adjusting alignment.
| Application | (1) In. (mm) |
|---|---|
| Montero | .83-.91 (21.0-23.0) |
| Montero Sport | 2.7 (68) |
| (1) Distance between lower control bumper stop and bracket. (Scheme 1) | |
| (1) | Distance between lower control bumper stop and bracket. (Scheme 1) |
RIDING HEIGHT SPECIFICATIONS (FRONT)
