Home/Mitsubishi/Galant/Mitsubishi Galant VII (1992-1997)/Repair manual/Removal & Installation/Engine Controls - Remove/install/overhaul: Specifications
Contents Wiring diagrams Section: Removal & Installation All sections

Engine Controls - Remove/install/overhaul: Specifications Mitsubishi Galant VII

TORQUE SPECIFICATIONS

ApplicationsFt. Lbs. (N.m)
Coolant Temperature Sensor22 (29)
Exhaust Manifold-To-Engine Nuts18-22 (24-29)
Exhaust Pipe Bolts22-29 (29-39)
Fuel Tank Drain Plug11-18 (15-24)
Fuel Tank Nuts15-22 (20-29)
Knock Sensor15-18 (20-24)
Oil Pipe-To-Engine10-14 (14-19)
Oxygen (O2) Sensor29-36 (39-49)
Plenum-To-Intake Manifold Bolts11-15 (15-20)
INCH Lbs. (N.m)
Camshaft Position Sensor84 (9)
Crankshaft Position Sensor84 (9)
Distributor Hold-Down Bolt108 (12)
EGR Temperature Sensor89 (10)
Fuel Rail Bolts84-108 (9.0-12.0)
Heat Protector Bolts108-132 (12.0-15.0)
ISC Switch Screws20-54 (2.5-4.5)
TPS Switch Screws13-20 (1.5-2.5)
Wastegate Actuator Bolts84-108 (9.0-12.0)

TORQUE SPECIFICATIONS