AUDIO ERROR CODES
If the radio and CD player or radio, CD player and CD changer detects any malfunction in itself or the inserted CD, the error codes below will be shown on the multi-center display.
Scheme 349
| ERROR CODES | CAUSE | CAUSE OF TROUBLE AND ITS SOLUTION | |
|---|---|---|---|
| LOW GRADE TYPE | MIDDLE GRADE TYPE | ||
| E | ERROR | Connection error | This error code will be shown if the radio and CD player or radio, CD player and CD changer are not connected to their related components correctly. Check the connectors and wiring harness for open or short circuit. |
| E01 | ERROR 01 | Focus error | If there is any problem on the CD, this error code will be shown. If no error message appears when another disc is inserted, the disc is defective. Check the items below, and take a necessary action. Contamination, scratch, or deformation Formation of moisture or grease Insert the disc again, and check that no error appear. |
| E02 | ERROR 02 | Abnormal disc | |
| E03 | ERROR 03 | Mechanical error | This error codes will be shown if there is any internal mechanical or electrical problem in the radio and CD player or radio, CD player and CD changer. Replace the radio and CD player or radio, CD player and CD changer, and check that no error codes are shown. |
| E HOT | ERROR HOT | Protection against high temperature | If the internal temperature is extremely high, this error code will be shown. Turn off the radio and CD player or radio, or CD player and CD changer and wait until they cool down. Wait for a while, and then turn on the unit again. Check that the same error does not appear. |
AUDIO SYSTEM DIAGNOSTIC CHART