FASTENER TIGHTENING SPECIFICATIONS
| ITEM | SPECIFICATION |
|---|---|
| Brake line | |
| Brake tube flare nut | 15 +/- 2 N.m (12 +/- 1 ft-lb) |
| Brake pedal | |
| Brake booster nut | 14 +/- 2 N.m (122 +/- 25 in-lb) |
| Brake pedal bolt | 13 +/- 2 N.m (115 +/- 18 in-lb) |
| Front disc brake | |
| Brake hose connector bolt | 30 +/- 4 N.m (22 +/- 3 ft-lb) |
| Caliper bleeder | 7.9 +/- 1.9 N.m (70 +/- 16 in-lb) |
| Front brake assembly mounting bolt | 100 +/- 10 N.m (74 +/- 7 ft-lb) |
| Front brake bolt (guide pin bolt) | 38 +/- 4 N.m (28 +/- 3 ft-lb) |
| Front brake bolt (lock pin bolt) | 38 +/- 4 N.m (28 +/- 3 ft-lb |
| Master cylinder assembly and brake booster | |
| Brake booster nut | 13 +/- 2 N.m (115 +/- 18 in-lb) |
| Brake fluid proportioning valve < Vehicles without ABS > | 30 +/- 5 N.m (22 +/- 4 ft-lb) |
| Brake master cylinder mounting nut | 18 +/- 3 N.m (13 +/- 2 ft-lb) |
| Rear disc brake | |
| Brake hose connector bolt | 30 +/- 4 N.m (22 +/- 3 ft-lb) |
| Caliper bleeder | 7.9 +/- 0.9 N.m (70 +/- 8 in-lb) |
| Rear brake assembly mounting bolt | 60 +/- 5 N.m (45 +/- 3 ft-lb) |
| Rear brake pin (guide pin bolt) | 44 +/- 5 N.m (32 +/- 4 ft-lb) |
| Rear brake pin (lock pin bolt) | 44 +/- 5 N.m (32 +/- 4 ft-lb) |
FASTENER TIGHTENING SPECIFICATIONS
GENERAL SPECIFICATIONS
| ITEM | SPECIFICATION | |
|---|---|---|
| Master cylinder | Type | Tandem type |
| I. D. mm (in) | 25.4 (1.0) | |
| Brake booster | Type | Vacuum type, tandem |
| Effective dia. of power cylinder mm (in) | 205 + 230 (8 + 9) | |
| Boosting ratio | 8.3 | |
| Rear wheel hydraulic control method | Electronic brake-force distribution (EBD) < Vehicles with ABS > Proportioning valves < Vehicles without ABS > | |
| Front brakes | Type | Floating caliper, 1 piston, ventilated disc |
| Disc effective dia X thickness mm (in) | 222 X 26.0 (8.7 X 1.02) < 2.4L engine > 241 X 26.0 (9.5 X 1.02) < 3.8L engine > | |
| Wheel cylinder I. D. mm (in) | 60.33 (2.38) | |
| Pad thickness mm (in) | 10.0 (0.39) | |
| Clearance adjustment | Automatic | |
| Rear brakes | Type | Floating caliper, 1 piston, solid disc |
| Disc effective dia X thickness mm (in) | 222 X 10 (8.7 X 0.39) | |
| Wheel cylinder I.D. mm (in) | 34.9 (1.38) | |
| Pad thickness mm (in) | 10.0 (0.39) | |
| Clearance adjustment | Automatic | |
GENERAL SPECIFICATIONS
SERVICE SPECIFICATIONS
| ITEM | STANDARD VALUE | LIMIT | |
|---|---|---|---|
| Brake pedal height mm (in) | 169.8-172.8 (6.69-6.80) | ||
| Brake pedal free play mm (in) | 3-8 (0.12-0.31) | ||
| Brake pedal to floor board clearance mm (in) | 110 (4.33) or more | ||
| Proportioning valve output fluid pressure MPa (psi) < Vehicles without ABS > | Split point | 3.68-4.17 (534-605) | |
| When input fluid pressure is 7.85 MPa (1,139 psi). | 5.24-5.74 (760-833) | ||
| Proportioning valve output fluid pressure difference between left and right MPa (psi) | 0.5 (73) | ||
| Disc brake pad thickness mm (in) | 10.0 (0.39) | Minimum 2.0 (0.08) | |
| Disc brake disc thickness mm (in) | Front | 26.0 (1.02) | Minimum 24.4 (0.96) |
| Rear | 10.0 (0.39) | Minimum 8.4 (0.33) | |
| Disc brake disc run-out mm (in) | Front | 0.1 (0.0039) | |
| Rear | 0.04 (0.0016) | ||
| Disc brake drag force N (lb) | Front - 2.4L engine | 54 (12) or less | |
| Front - 3.8L engine | 64 (14) or less | ||
| Rear | 54 (12) or less | ||
| Hub end play mm (in) | 0.05 (0.002) | ||
| Brake booster push rod protruding length mm (in) [When applying negative pressure of 66.7 kPa (19.7 in. Hg) to the brake booster] | 10.28-10.52 (0.405-0.414) | ||
SERVICE SPECIFICATIONS