FASTENER TIGHTENING SPECIFICATIONS
| ITEM | SPECIFICATION |
|---|---|
| Hood | |
| Hood hinge bolt (body side) | 12 +/- 2 N.m (102 +/- 22 in-lb) |
| Hood hinge bolt (hood side) | 12 +/- 2 N. m (102 +/- 22 in-lb) |
| Hood hinge nut (body side) | 12 +/- 2 N. m (102 +/- 22 in-lb) |
| Hood latch bolt | 9.0 +/- 2.0 N. m (80 +/- 17 in-lb) |
| Fuel filler lid | |
| Fuel filler neck reinforcement plate bolt | 5.0 +/- 1.0 N. m (44 +/- 9 in-lb) |
| Strut tower bar | |
| Strut tower bar bolt | 12 +/- 2 N. m (102 +/- 22 in-lb) |
| Strut tower bar nut | 12 +/- 2 N. m (102 +/- 22 in-lb) |
| Door | |
| Door check bolt (body side) | 9.0 +/- 2.0 N. m (80 +/- 17 in-lb) |
| Door check bolt (door side) | 5.0 +/- 1.0 N. m (44 +/- 9 in-lb) |
| Door hinge bolt (body side) | 27 +/- 5 N. m (20 +/- 4 ft-lb) |
| Door hinge bolt (door side) | 21 +/- 4 N. m (16 +/- 2 ft-lb) |
| Door latch assembly screw | 5.9 +/- 1.0 N. m (52 +/- 9 in-lb) |
| Door outside handle bolt | 9.0 +/- 2.0 N. m (80 +/- 17 in-lb) |
| Door switch screw | 3.9 +/- 1.0 N. m (35 +/- 8 in-lb) |
| Door window module assembly bolt | 9.0 +/- 2.0 N. m (80 +/- 17 in-lb) |
| Delta window glass bolt | 10 +/- 1 N. m (89 +/- 8 in-lb) |
| 27 +/- 1 N. m (20 +/- 1 ft-lb) | |
| Delta window glass nut | 10 +/- 1 N. m (89 +/- 8 in-lb) |
| Striker screw | 24 +/- 3 N. m (18 +/- 2 ft-lb) |
| Liftgate | |
| Ball joint | 13 +/- 2 N. m (111 +/- 22 in-lb) |
| Liftgate gas spring bracket bolt | 5.0 +/- 1.0 N. m (44 +/- 9 in-lb) |
| Liftgate hinge bolt (liftgate side) | 12 +/- 2 N. m (102 +/- 22 in-lb) |
| Liftgate hinge nut (body side) | 24 +/- 4 N. m (18 +/- 3 ft-lb) |
| Liftgate latch bolt | 22 +/- 4 N. m (16 +/- 3 ft-lb) |
| Striker screw | 22 +/- 4 N. m (16 +/- 3 ft-lb) |
| Sunroof | |
| Roof lid glass screw | 5.5 +/- 0.5 N. m (49 +/- 4 in-lb) |
| Sunroof assembly nut | 7.0 +/- 1.0 N. m (43 +/- 8 in-lb) |
| Sunroof motor bolt | 4.5 +/- 0.5 N. m (40 +/- 4 in-lb) |
| Loose panel | |
| Child restraint bracket bolt | 22 +/- 4 N. m (16 +/- 3 ft-lb) |
| Cooler tube assembly bolt | 12 +/- 2 N. m (102 +/- 22 in-lb) |
| Front bumper reinforcement bracket bolt | 24 +/- 4 N. m (18 +/- 3 ft-lb) |
| Front end structure bar bolt | 22 +/- 4 N. m (16 +/- 3 ft-lb) |
| 24 +/- 4 N. m (18 +/- 3 ft-lb) | |
| Front floor backbone brace bolt | 22 +/- 4 N. m (16 +/- 3 ft-lb) |
| Upper frame to front pillar brace bolt | 22 +/- 4 N. m (16 +/- 3 ft-lb) |
FASTENER TIGHTENING SPECIFICATIONS
See also:
• SYMPTOM CHART