REMOVAL AND INSTALLATION
| WARNING | For removal and installation of the passenger's side air bag module, always observe the service procedures described in AIR BAG SAFETY PRECAUTIONS . |
The bolts and screws described below are used for installation of the instrument panel. They are indicated by symbols in the illustration.
Scheme 5
Scheme 6
Scheme 7
Scheme 8
Scheme 9
Scheme 10
Scheme 11
Scheme 12
Scheme 13
Scheme 14
Scheme 15
Scheme 16
< > INSIDE REAR VIEW MIRROR REMOVAL
Insert a narrow flat-tip screwdriver into the slit in the inside rear view mirror in the direction of the arrow in the illustration.
Scheme 17
Note. While the spring is pushed in, connection between the spring and the pawl of the button is released.
| WARNING | Before removing a seat equipped with a side air bag module, refer to AIR BAG SAFETY PRECAUTIONS . |
Scheme 18
>>A<< FRONT SEAT ASSEMBLY INSTALLATION
First install all of the front seat assembly mounting nuts and bolts, and then tighten them to the specified torque.
< > REAR SEAT CUSHION REMOVAL
While pulling the rear seat stopper, lift up the seat cushion to remove it.
Scheme 19
>>A<< REAR SEATBACK INSTALLATION
Push the rear seatback in the direction indicated in the illustration; then securely attach the attachment wire to the body side hook and install the rear seatback.
Scheme 20
Scheme 21
Scheme 22
Scheme 23
Scheme 24
>>A<< ADJUSTABLE SEAT BELT ANCHOR INSTALLATION
Observe the order shown in illustration.
