TIMING BELT INTERFERENCE CAUTION
Note. CAMSHAFT DRIVE BELTS OR TIMING BELTS: The condition of camshaft drive belts should always be checked on vehicles which have more than 50,000 miles. Although some manufacturers do not recommend replacement at a specified mileage, others require it at 60,000-100,000 miles. A camshaft drive belt failure may cause extensive damage to internal engine components on most engines, although some designs do not allow piston-to-valve contact. These designs are often called "Free Wheeling". Many manufacturers changed their maintenance and warranty schedules in the mid-1980's to reflect timing belt inspection and/or replacement at 50,000-60,000 miles. Most service interval schedules shown in this section reflect these changes. Belts or components should be inspected and replaced if any of the following conditions exist
- Crack Or Tears In Belt Surface
- Missing, Damaged, Cracked Or Rounded Teeth
- Oil Contamination
- Damaged Or Faulty Tensioners
- Incorrect Tension Adjustment
| Application | Engine | Replacement Interval (Miles) |
|---|
| Cordia | 1983-88 | 1.8L 4-Cyl. | (4) 60,000 |
| " | 1983-88 | 2.0L 4-Cyl. | (4) 60,000 |
| Diamante | 1992-96 | (2) 3.0L V6 (DOHC) | 60,000 |
| " | 1992-96 | 3.0L V6 (SOHC) | (4) 60,000 |
| Eclipse |
| 1990-94 | 1.8L 4-Cyl. | (4) 60,000 |
| 1990-95 | (2) 2.0L 4-Cyl. | (4) 60,000 |
| 1990-94 | (2) 2.0L 4-Cyl. Non-Turbo | (4) 60,000 |
| 1990-96 | (2) 2.0L 4-Cyl. Turbo | (4) 60,000 |
| 1996 | (2) 2.4L 4-Cyl. | (4) 60,000 |
| Expo | 1992-95 | 1.8L 4-Cyl. | 60,000 |
| " | 1992-95 | (2) 2.4L 4-Cyl. | (4) 60,000 |
| Expo LRV | 1995 | 1.8L 4-Cyl. | 60,000 |
| " | 1995 | (2) 2.4L 4-Cyl. | (4) 60,000 |
| Galant |
| 1985-87 | (2) 2.4L 4-Cyl. | (4) 60,000 |
| 1988 | 3.0L V6 | (3) 60,000 |
| 1989-93 | (2) 2.0L 4-Cyl. (DOHC) | (4) 60,000 |
| " | 2.0L 4-Cyl. (SOHC) | (4) 60,000 |
| 1994-96 | (2) 2.4L 4-Cyl. (DOHC) | (4) 60,000 |
| " | 2.4L 4-Cyl. (SOHC) | (4) 60,000 |
| Mirage |
| 1985-96 | (2) 1.5L 4-Cyl. | 60,000 |
| 1985-88 | (2) 1.6L 4-Cyl. Turbo | 60,000 |
| 1989, 1991 | (2) 1.6L 4-Cyl. | 60,000 |
| 1993-96 | 1.8L 4-Cyl | 60,000 |
| Precis | 1987-93 | (2) 1.5L 4-Cyl. | 60,000 |
| Sigma | 1989-90 | 3.0L V6 | (3) 60,000 |
| Tredia | 1983-88 | 1.8L 4-Cyl. | (4) 60,000 |
| " | 1983-88 | 2.0L 4-Cyl. | (4) 60,000 |
| 3000GT | 1991-96 | (2) 3.0L V6 | 60,000 |
| (1) Other interference engine applications may exist which are not indicated here. (2) Interference engine. Check for possible damage to piston(s) or valve(s) if there has been a timing belt failure. (3) Although the vehicle manufacturer does not recommend a specific scheduled maintenance interval, aftermarket belt manufacturers suggest the belt be replaced at 60,000 mile intervals. (4) Vehicle manufacturer recommends replacing all belts at the same time. |
| (1) | Other interference engine applications may exist which are not indicated here. |
| (2) | Interference engine. Check for possible damage to piston(s) or valve(s) if there has been a timing belt failure. |
| (3) | Although the vehicle manufacturer does not recommend a specific scheduled maintenance interval, aftermarket belt manufacturers suggest the belt be replaced at 60,000 mile intervals. |
| (4) | Vehicle manufacturer recommends replacing all belts at the same time. |
TIMING BELT INTERFERENCE VERIFICATION (1)
| Application | Engine | Replacement Interval (Miles) |
|---|
| Montero |
| 1985-96 | 3.0L V6 | (3) 60,000 |
| 1994-96 | 3.5L V6 | (3) 60,000 |
| Pickup |
| 1983-89 | 2.0L 4-Cyl. | (3) 60,000 |
| 1983-86 | (2) 2.3L 4-Cyl. Turbo Diesel | (4) 60,000 |
| 1990-96 | 2.4L 4-Cyl. | (4) 60,000 |
| " | 3.0L V6 | (3) 60,000 |
| Van 1987-90 | 2.4L 4-Cyl. | (4) 60,000 |
| (1) Other interference engine applications may exist which are not indicated here. (2) Interference engine. Check for possible damage to piston(s) or valve(s) if there has been a timing belt failure. (3) Although the vehicle manufacturer does not recommend a specific scheduled maintenance interval, aftermarket belt manufacturers suggest the belt be replaced at 60,000 mile intervals. (4) Vehicle manufacturer recommends replacing all belts at the same time. |
| (1) | Other interference engine applications may exist which are not indicated here. |
| (2) | Interference engine. Check for possible damage to piston(s) or valve(s) if there has been a timing belt failure. |
| (3) | Although the vehicle manufacturer does not recommend a specific scheduled maintenance interval, aftermarket belt manufacturers suggest the belt be replaced at 60,000 mile intervals. |
| (4) | Vehicle manufacturer recommends replacing all belts at the same time. |
TIMING BELT INTERFERENCE VERIFICATION (1)
