12 1 170 Spark plug tool
Minimum set: Mechanical tools
In conjunction with: 12 1 200
Note. For releasing spark plugs as well as for tightening to torque limit
Engine: M40, M42, M43, M43TU, M44, M50, M52, M60, M62, M70, M73, N12, N14, N40, N42, N45, N46, N54, N73, S14, S38, S50B30, S50B32, S85, W10, W11
Storage location: B13
Order number: 12 1 170
Spark plug tool
Consisting of
1 = 12 1 171 Spark plug key WAF 16 mm
Note. S50, M40, M42, M43, M44, M50, M52, M60, M62, M70, M73, W10, W11, N40, N42, N73
In conjunction with: 12 1 172 (S50), 12 1 200 (M40, M42, M43, M44, M50, M52, M60, M62, M70, M73, W10, W11, N73)
2 = 12 1 172 Torque limiter 23 Nm ± 3 Nm
Note. S14, S38, S50
In conjunction with: 12 1 171 (S50), 121 160 (S14, S38)
Scheme 214
12 1 220 Spark plug wrench WAF 14 mm bihexal
Minimum set: Mechanical tools
Engine: N12, N14, N45, N54
SI number: 1 04 06 (246)
Order number: 12 1 220
Spark plug wrench WAF 14 mm bihexal
Scheme 215
12 7 060 Antistatic mat (ESD)
Note. ESD (Electro Static Discharge) For protection against ESD during repairs to electronic components. (Replaces the sub-number 12 7 192 from Eprom tool kit 12 7 190)
Series: E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E68, E70, E81, E82, E83, E85, E86, E87, E90, E91, E92, E93, R50, R52, R53, R55, R56, RR1, RR2
SI number: 2 06 04 (128)
Order number: 12 7 060
Antistatic mat (ESD)
Scheme 216
12 7 121 Counterholder wrench
In conjunction with: Socket
Note. Alternator N42 engine
Order number: 12 7 121
Counterholder wrench
12 7 122 Socket
In conjunction with: Counterholder wrench
Note. Hazet 8808 Ig10
SI number: 1 28 03 (051)
Order number: 12 7 122
Socket
12 7 190 Eprom tools / ID marking
Note. Set no longer available. Antistatic mat can be ordered using number 12 7 060..
Storage location: J 101
Order number: 12 7 190
Eprom tools / ID marking
Consisting of
1 = 12 7 191 Eprom puller pliers
Note. No longer available. Antistatic mat can be ordered using special tool number 12 7 060.
2 = 12 7 192 Antistatic mat
Note. Is replaced by main number 12 7 060.
12 7 200 Set of tools
Note. For opening & closing control unit box
Storage location: J 106
Order number: 12 7 200
Set of tools
Consisting of
1 = 12 7 201 Pliers
Note. For bending open tab washers
2 = 12 7 202 Lever
Note. For bending tab washers
3 = 12 7 203 Pliers
Note. For closing tab washers
4 = 12 7 204 Torx socket T20
5 = 12 7 205 Torx socket T10
6 = 12 7 206 Fine pen
Note. Black, waterproof
8 = 12 7 208 Slotted screwdriver 2 mm
9 = 12 7 209 Straightening tool
Note. For Eprom connections
12 7 210 Control unit seal
Storage location: J 106
Order number: 12 7 210
Control unit seal
Consisting of
1 = 12 7 211 Seal marks
2 = 12 7 212 Hole punch
Note. For seal mark dating