VEHICLE PROGRAMMING AND CODING MINI Cooper Clubman I facelift

VEHICLE PROGRAMMING AND CODING

Select menu item (1).

Select corresponding procedure from selection list.

Example

Scheme 251

1. Preparation and subsequent evaluation of vehicle programming
2. Start a Progman session
3. Sequence of BMW/MINI vehicle programming and coding
4. BMW/MINI Car & Key Memory
5. BMW/MINI initializations
6. BMW/MINI service functions in Progman

Note. In order to avoid incorrect programming procedures and error messages, it is essential when working with the Progman programming system always to use the latest Progman version.

Unlock locking flap (1) of corresponding cable.

With special tool 61 1 136 or 61 1 137 (ejector), press back arrester hook (2) of appropriate contact and pull out cable.

Place special tool 61 1 153 on relay carrier (1) and carefully pull in direction of arrow until retaining lugs (2) on relay carrier are raised.

Pull relay carrier (2) in direction of arrow into first catch (3).

Press down arrester hook (4) of appropriate contact and pull out cable with contact.

Press out double flat spring contact with special tool 61 1 136 or 61 1 137 (ejector).