Home/Mercury/Sable/Mercury Sable III (1995-1999)/Repair manual/General Servicing - All Makes/HVAC System - General Servicing: Component Locations
Contents Wiring diagrams Section: General Servicing - All Makes All sections

HVAC System - General Servicing: Component Locations Mercury Sable III

SERVICE VALVE LOCATIONS

For service valve locations, see the SERVICE VALVE LOCATIONS table.

VehicleHighLow
Aspire(3)(1)
Continental(4)(5)
Contour & Mystique
2.0L Engine(6)(7)
2.5L Engine(6)(8)
Cougar & Thunderbird(6)(2)
Crown Victoria, Grand Marquis Town Car(6)(2)
Escort & Tracer(10)(2)
Mark VIII(6)(8)
Mustang(6)(2)
Probe(3)(2)
Sable & Taurus(9)(7)
(1) In suction (low pressure) line. (2) On accumulator-drier or filter-drier. (3) On liquid line extension, in front of condenser. (4) On condenser to evaporator tube, right of radiator. In the stowed position, is clipped to the condenser. (5) On suction line, at evaporator core outlet tube. (6) On A/C manifold and tube, between A/C compressor and condenser. (7) On suction line, between evaporator core and accumulator-drier. (8) On A/C manifold and tube, between A/C compressor and accumulator-drier. (9) On condenser to evaporator tube, on an extension, near accumulator-drier. (10) In discharge (high pressure) line, near condenser.
(1)In suction (low pressure) line.
(2)On accumulator-drier or filter-drier.
(3)On liquid line extension, in front of condenser.
(4)On condenser to evaporator tube, right of radiator. In the stowed position, is clipped to the condenser.
(5)On suction line, at evaporator core outlet tube.
(6)On A/C manifold and tube, between A/C compressor and condenser.
(7)On suction line, between evaporator core and accumulator-drier.
(8)On A/C manifold and tube, between A/C compressor and accumulator-drier.
(9)On condenser to evaporator tube, on an extension, near accumulator-drier.
(10)In discharge (high pressure) line, near condenser.

SERVICE VALVE LOCATIONS