Home ReviewsRefund
Home/Mercury/Mystique/Mercury Mystique I (1994-2000)/Repair manual/Engine Controls - Tests W/codes - 2.5L: Diagnosis/CONTINUOUS MEMORY SELF-TEST (EXPANDED MODE)
Contents Wiring diagrams Section: Engine Controls - Tests W/codes - 2.5L: Diagnosis All sections

CONTINUOUS MEMORY SELF-TEST (EXPANDED MODE) Mercury Mystique I

Engine Controls - Tests W/codes - 2.5L: Diagnosis 1 illustration

CONTINUOUS MEMORY SELF-TEST (EXPANDED MODE)

Turn ignition switch to OFF position. Ensure test equipment is properly attached. Program scan tester using the following steps

Scheme 100

Scheme 100: CONTINUOUS MEMORY SELF-TEST (EXPANDED MODE)
Scheme 100: CONTINUOUS MEMORY SELF-TEST (EXPANDED MODE)
  1. Select vehicle and engine selection menu. (Scheme 100)
  2. Select year, engine, model and any additional information requested by scan tester.
  3. Select DIAGNOSTIC DATA LINK.
  4. Select PCM - POWERTRAIN CTRL MODULE.
  5. Select DIAGNOSTIC TEST MODES.
  6. Select RETRIEVE/CLEAR CONTINUOUS DTCs.
  7. Turn ignition on.
  8. Follow operating instructions from scan tester menu.