DIGITAL TRANSMISSION RANGE (DTR) SENSOR
- Raise and support vehicle. Disconnect manual shift control cable. Disconnect DTR sensor electrical connector. Remove manual control lever nut. Remove manual control lever. Loosen DTR sensor bolts.
- Manual shift lever must be in neutral position. Using DTR Sensor Alignment Tool (T97L-70010-A), align DTR sensor slots. Tighten DTR sensor bolts. Install manual control lever. Install NEW manual shaft outer nut. Tighten fasteners to specification. See «TORQUE SPECIFICATIONS»(ref-644-S22361854752000031300000) . With manual lever in Overdrive, connect shift lever control cable. Connect DTR electrical connector.