GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Normal engine cranking speed | 200-250 rpm |
| Starter motor no-load current draw | 60-80 amps |
| Starter motor normal load current draw | 130-190 amps |
| Starter motor maximum load current draw | 800 amps |
| Starting circuit maximum voltage drop (Engine at normal operating temperature) | 0.5 volts |
GENERAL SPECIFICATIONS
TORQUE SPECIFICATIONS
| Description | Nm | Lb-ft | Lb-in |
|---|---|---|---|
| Transaxle roll restrictor bolt (1) | 48 | 35 | |
| Transaxle roll restrictor cross brace bolts (1) | 55 | 41 | |
| Starter motor solenoid S terminal (small nut) | 6 | 53 | |
| Starter motor solenoid B+ terminal (large nut) | 12 | 9 | |
| Starter motor bolts | 25 | 18 | |
| (1) When reinstalling fasteners originally coated with threadlocker, clean with a wire brush prior to applying new threadlocker. Apply threadlocker to the threads of the bolt(s). | |||
| (1) | When reinstalling fasteners originally coated with threadlocker, clean with a wire brush prior to applying new threadlocker. Apply threadlocker to the threads of the bolt(s). |
TORQUE SPECIFICATIONS