Speaker System: Removal & Installation Mercury Montego III

Removal and Installation

1. Remove the door trim panel. For additional information, refer to «INTERIOR TRIM AND ORNAMENTATION»(ref-233049) .
2. Remove the 4 screws and the door speaker. Disconnect the electrical connector.
3. To install, reverse the removal procedure.

Scheme 41

1. Remove the parcel shelf. For additional information, refer to «INTERIOR TRIM AND ORNAMENTATION»(ref-233049) .
2. Remove the 4 screws and the parcel shelf speaker. Disconnect the electrical connector.
3. To install, reverse the removal procedure.

Scheme 42

1. Remove the RH rear quarter trim panel. For additional information, refer to «INTERIOR TRIM AND ORNAMENTATION»(ref-233049) .
2. Remove the speaker cushion.
3. Remove the 4 screws and the subwoofer speaker. Disconnect the electrical connector.
4. To install, reverse the removal procedure.

Scheme 43

1. Remove the RH rear quarter trim panel. For additional information, refer to «INTERIOR TRIM AND ORNAMENTATION»(ref-233049) .
2. Remove the 4 nuts and the speaker enclosure. Disconnect the electrical connector.
3. To install, reverse the removal procedure.