Home/Mercury/Montego/Mercury Montego III (2004-2007)/Repair manual/Charging System/Battery, Mounting and Cables: Specifications
Contents Wiring diagrams Section: Charging System All sections

Battery, Mounting and Cables: Specifications Mercury Montego III

GENERAL SPECIFICATIONS

ItemSpecification
Voltage12 Volt
Cold cranking amps (CCA) measured at -18°C (0°F)540 CCA (standard) 600 CCA (optional)
Battery amps rating58 amps/hr (standard) 68 amps/hr (optional)

GENERAL SPECIFICATIONS

TORQUE SPECIFICATIONS

DescriptionNm
Battery cable terminal nuts7
Battery hold-down clamp bolt8
Battery junction box (BJB) cable nut5
Battery positive terminal cable end nut5
Battery tray bolts10
Body ground cable bolt12
Engine ground cable bolt12
Generator B+ cable nut8
Starter B+ cable nut12

TORQUE SPECIFICATIONS