Home ReviewsRefund
Home/Mercedes-Benz/E-class/Mercedes-Benz E-class W210/S210 facelift (1999-2003)/Repair manual/Mechanical/Engine Mechanical: Specifications
Contents Wiring diagrams Section: Mechanical All sections

Engine Mechanical: Specifications Mercedes-Benz E-class W210/S210 facelift

Mechanical

Crankcase Capacity

Oil capacity is 8.5 qts. (8.0L) with a new filter.

TORQUE SPECIFICATIONS

ApplicationFt. Lbs. (N.m)
A/C Compressor-To-Bracket Bolt17 (23)
Camshaft Bearing Cap Bolts11 (15)
Camshaft Gear Nut13 (18)
Chain Tensioner59 (80)
Connecting Rod Bearing Cap Bolt
First Step30 (40)
Second Step(1)
Crankshaft Bearing Cap Bolts
Step 141 (55)
Step 2(1)
Crankshaft Pulley Bolts18 (25)
Cylinder Head Bolts
Step 111 (15)
Step 226 (35)
Step 3 (After 10 Minute Wait)(1)
Step 4(1)
Cylinder Head Bolts-To-Timing Cover18 (25)
Drive Plate Bolts
Step 133 (45)
Step 2(1)
Engine Mount-To-Axle Carrier Bolts30 (40)
Oil Pan Bolts
8-mm18 (25)
10-mm(2)
Prechamber Threaded Ring96 (130)
Power Steering Pump
Return Line26-33 (35-45)
Supply Line33-37 (45-50)
Steering Coupling Bolt15 (20)
Transmission Housing-To-Oil Pan30 (40)
Vibration Damper Center Bolt148 (200)
INCH Lbs. (N.m)
End Cover Bolts89 (89)
Timing Cover-To-Crankcase Bolts
6-mm89 (10)
8-mm(2)
Oil Pan Bolts
6-mm89 (10)
Valve Cover Bolts89 (10)
(1) Tighten an additional 90 degrees. (2) Information not available.
(1)Tighten an additional 90 degrees.
(2)Information not available.

TORQUE SPECIFICATIONS

GENERAL SPECIFICATIONS

ApplicationSpecification
Displacement183.1 Cu. In. (3.0L)
Bore3.43" (87.0 mm)
Stroke3.31" (84.0 mm)
Compression Ratio22:1
Fuel SystemElectronic Diesel Control (EDC)

GENERAL SPECIFICATIONS

CYLINDER BLOCK SPECIFICATIONS

ApplicationIn. (mm)
Height
New9.250-9.253 (234.97-235.03)
Minimum9.236 (234.60)
Cylinder Sleeve Bore
Standard3.4252 (87.0)
Group "A"3.4252-3.4254 (87.000-87.006)
Group "X"3.4254-3.4256 (87.006-87.012)
Group "B"3.4256-3.4258 (87.012-87.018)
Wear Limit
Longitudinal & Transverse Direction.007 (.20)
Shape Difference
New (Maximum).00055 (.014)
Limit.00196 (.05)
Out-Of-Roundness
Maximum.0027 (.07)
Cylinder Bore
Diameter For Liner3.5433-3.5446 (90.000-90.035)
Diameter For Liner Collar3.564-3.568 (90.55-90.65)
Liner Collar Seat Depth.039-.047 (1.0-1.2)
Piston Projection
New Crankcase.0309-.0399 (.785-1.015)
Machined Crankcase.0387-.0478 (.985-1.215)
Crankshaft Main Bearing Bore Diameter2.460-2.461 (62.50-62.52)
Crankshaft Main Bearing Bore
Width At Fit Bearing.9440-.9448 (23.98-24.00)

CYLINDER BLOCK

CRANKSHAFT, MAIN BEARINGS & CONNECTING ROD BEARINGS SPECIFICATIONS

ApplicationIn. (mm)
Crankshaft
End Play
Standard.004-.010 (.10-.25)
Wear Limit.012 (.30)
Main Bearings
Journal Diameter2.2834 (58.00)
Color Coding
Blue(1) .0887-.0889 (2.255-2.260)
Yellow(1) .0889-.0891 (2.260-2.265)
Red(1) .0891-.0893 (2.265-2.270)
White(1) .0893-.0895 (2.270-2.275)
Purple(1) .0895-.0897 (2.275-2.280)
Journal Diameter2.2736 (57.75)
Color Coding
Blue(1) .0935-.0937 (2.375-2.380)
Yellow(1) .0937-.0938 (2.380-2.385)
Journal Diameter2.2716 (57.70)
Color Coding
Blue(1) .0984-.0986 (2.500-2.505)
Yellow(1) .0986-.0988 (2.505-2.510)
Journal Diameter2.2539 (57.25)
Color Coding
Blue(1) .1033-.1035 (2.625-2.630)
Yellow(1) .1035-.1037 (2.630-2.635)
Journal Diameter2.2440 (57.00)
Color Coding
Blue(1) .1082-.1084 (2.750-2.755)
Yellow(1) .1084-.1086 (2.755-2.760)
(1) Main bearing shell thickness.
(1)Main bearing shell thickness.

CRANKSHAFT, MAIN & CONNECTING ROD BEARINGS

CYLINDER HEAD SPECIFICATIONS

ApplicationIn. (mm)
Height
New4.994-5.005 (126.85-127.15)
Minimum4.992 (126.8)
Surface UnevennessLess Than .0015 (.04)
Valve Guides
Cylinder Head Basic Bore
Standard Size.4921-.4925 (12.50-12.51)
Standard Size I.4933 (12.53)
Repair Size I.4999 (12.70)
Valve Guide Outer Diameter
Standard Size.4936-.4940 (12.54-12.55)
Standard Size I (Grey).4944-.4948 (12.56-12.57)
Repair Size I (Red).5015-.5019 (12.74-12.75)
Valve Guide Inner Diameter
Intake.2362-.2368 (6.000-6.015)
Exhaust.2755-.1761 (7.000-7.015)
Valve Guide Length1.476 (37.5)

CYLINDER HEAD

More articles — Engine Mechanical