Engine Mechanical: Specifications — Mercedes-Benz E-class W210/S210 (1995-1999)

Engine Mechanical: Specifications Mercedes-Benz E-class W210/S210

Crankcase Capacity

Total oil capacity is 8.2 qts. (7.8L). Oil capacity is 7.0 qts. (6.6L) with a new filter.

Application			Ft. Lbs. (N.m)
Camshaft Bearing Cap Bolts			18 (25)
Camshaft Flange Shaft Bolt			13 (18)
Camshaft Flange Shaft Bolt (Torx Head)			16 (22)
Camshaft Gear Nut			48 (65)
Chain Tensioner Housing Nut			37 (50)
Chain Tensioner Housing Screw			30 (40)
Connection Rod Bearing Cap Bolt
First Step			22 (30)
Second Step			(1)
Crankshaft Bearing Cap Bolts
10-mm			41 (55)
12-mm			66 (90)
Crankshaft Pulley Bolts			24 (32)
Cylinder Head Bolts
8-mm Bolts			18 (25)
10-mm Bolts
Step 1			11 (15)
Step 2			26 (35)
Step 3			(1)
Step 4 (After 10-Minute Wait)			(1)
Drive Plate Bolts
Step 1			30 (40)
Step 2			(1)
Drive Shaft Clamping Nut			22-30 (30-40)
Dual-Mass Flywheel Bolts
Step 1			33 (45)
Step 2			(1)
Exhaust Pipe-To-Exhaust Manifold			18 (25)
Injection Pump Bolts			15 (20)
Intake Manifold
5-mm Bolts			(3)
7-mm Bolts			15 (20)
Oil Pump Bolts			18 (25)
Oil Pump Gear Bolt			24 (32)
Side Exhaust Support			18 (25)
Top Front Cover Bolts			15 (20)
Vibration Damper Bolt
Step 1			148 (200)
Step 2			(1)
INCH Lbs. (N.m)
Camshaft Holding Armature Bolt			62 (7)
Crankshaft Shield Bolts			89 (10)
Front Timing Cover Bolts
6-mm			89 (10)
8-mm			(2)
Oil Pan Bolts			89 (10)
Water Pump Bolts			89 (10)
(1) Tighten an additional 90 degrees. (2) Tighten to 15 ft. lbs. (20 N.m). (3) 89 INCH Lbs. 10 N.m.

(1)	Tighten an additional 90 degrees.

(2)	Tighten to 15 ft. lbs. (20 N.m).

(3)	89 INCH Lbs. 10 N.m.

TORQUE SPECIFICATIONS

GENERAL SPECIFICATIONS