Home/Mazda/Tribute/Mazda Tribute I рестайлинг (2004-2007)/Repair manual/Suspension Front/Technical Data (Suspension): Specifications

Contents

Section: Suspension Front

Service Tools (Suspension)

All sections

Technical Data (Suspension): Specifications Mazda Tribute I рестайлинг

Suspension Front

Alignment Specifications

Item	LH	RH	Split	Thrust Angle
Front
Caster	1.70° +/- 1.00°	1.70° +/- 1.00°	0.00° +/- 0.75°
Camber	1.00° +/- 0.75°	1.00° +/- 0.75°	0.00° +/- 0.75°
Toe @ curb ride height (positive value is toe-in, negative value is toe-out			0.23° +/- 0.23°
Rear - Early Build
Camber	0.10° +/- 0.75°	0.10° +/- 0.75°
Toe @ curb ride height (positive value is toe-in, negative value is toe-out	0.10° +/- 0.20°	0.10° +/- 0.20°	0.20° +/- 0.20°	0.00° +/- 0.30°
Rear - Late Build
Camber	0.00° +/- 0.75°	0.00° +/- 0.75°
Toe @ curb ride height (positive value is toe-in, negative value is toe-out	0.03° +/- 0.20°	0.03° +/- 0.20°	0.06° +/- 0.20°

ALIGNMENT SPECIFICATIONS

General Specifications

Item	Specification
Tire Inflation
Tires	See safety certification sticker located on the driver door jamb.

GENERAL SPECIFICATIONS

Tire Runout Specifications

Type Wheel	Max. Radial Runout	Max. Lateral Runout
Aluminum	1.5 mm (0.06 in)	2.0 mm (0.08 in)
Steel	1.5 mm (0.06 in)	2.0 mm (0.08 in)

TIRE RUNOUT SPECIFICATIONS