SYSTEM FLUSHING
| WARNING | Do not mix oil types. Any mixture or any unapproved oil can lead to seal deterioration and leaks. A leak can ultimately cause loss of fluid, which can result in a loss of power steering assist. |
Scheme 130
Scheme 131
Scheme 132
Scheme 133
Scheme 134
Scheme 135
- Remove the FUEL fuse to disable the vehicle.
- Disconnect the power steering return hose. Plug the reservoir.
- Attach an extension hose between the power steering return hose and an empty container.
- Raise the front wheels off the floor. Refer to «WHEELS AND TIRES»(ref-170227-S20113364152005010700000) .
- Fill the reservoir. Use MERCON(R) Automatic Transaxle Fluid (ATF).
- Turn the steering wheel from stop to stop while cranking the engine until the fluid exiting the power steering return hose is clear of all contamination and debris. Add MERCON(R) ATF as needed.
- Lower the vehicle.
- Disconnect the extension hose from the power steering return hose. Remove the plug. Attach the power steering return hose to the reservoir.
- Fill the reservoir. Use MERCON(R) ATF fluid.
- Install the FUEL fuse.
- Start the engine and turn the steering wheel from stop-to-stop.
- Check the power steering fluid level. Fill the reservoir. Use MERCON(R) ATF.