Brake Pedal Height Adjustment
| CAUTION | The brake switch may not operate normally after adjusting the pedal height. Whenever adjusting the pedal height, replace the brake switch with a new one. The interlock cable may not operate normally after adjusting the pedal height. Whenever adjusting the pedal height, refer to the INTERLOCK CABLE INSTALLATION NOTE . (See SELECTOR LEVER REMOVAL/INSTALLATION .) |
- Loosen the locknut and turn the push rod to adjust the pedal height.
- Tighten the locknut. Tightening torque 15.7-21.6 N.m {1.61-2.20 Kgf.m, 11.6-15.9 ft.lbf}
- After adjustment, inspect the pedal play.
Scheme 2
