Transaxle Fluid
Remove fill plug from transaxle. Fluid should be up to bottom of fill hole on side of case.
Transmission Fluid (RWD Models)
Remove fill plug from transmission. Fluid should be up to bottom of fill hole on side of case.
Transfer Case Fluid (4WD)
Remove fill plug from transfer case. Fluid should be up to bottom of fill hole on side of transfer case.
RECOMMENDED FLUID
| Application | Recommended Fluid | ||
|---|---|---|---|
| Power Take Off Unit | SAE 75W-140 | ||
| Transmission | |||
| B-Series | MERCON Or M-III ATF | ||
| Except B-Series | |||
| All-Season Usage | (1) SAE 75W-90 | ||
| Temp. Greater Than 50°F (10°C) | (1) SAE 80W-90 | ||
| Transfer Case | |||
| B-Series | MERCON Or M-III ATF | ||
| (1) Use API GL-4 or GL-5. | |||
| (1) | Use API GL-4 or GL-5. |
FLUID SPECIFICATIONS
DRAINING & FILLING
Raise and support vehicle. Remove drain plug and washer. Drain transmission fluid into proper container. Install drain plug and NEW washer. Tighten drain plug to specification. See TORQUE SPECIFICATIONS . Remove oil level plug and washer. Add recommended fluid, see RECOMMENDED FLUID table. DO NOT overfill. See FLUID CAPACITIES . Install oil plug and NEW washer. Tighten oil plug to specification. See TORQUE SPECIFICATIONS .