TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|
| Backing Plate Bolts (Rear) | 33-43 (45-58) |
| Caliper Guide Bolts (Rear) | 33-44 (45-60) |
| Caliper Mount Bracket Bolts (Rear) | 33-44 (45-60) |
| Front Caliper Mounting Bolt | 30-36 (40-49) |
| Power Brake Unit Nuts | 14-18 (19-25) |
| Wheel Lug Nut | 65-87 (88-118) |
| INCH Lbs. (N.m) |
| Wheel Cylinder Bleeder Screw | 52-78 (5.9-8.8) |
| Wheel Cylinder Mounting Bolt | 88-108 (10-12) |
DISC BRAKE SPECIFICATIONS
| Application | In. (mm) |
|---|
| Front (1) |
| Original Thickness | .87 (22) |
| Minimum Thickness (2) | .79 (20) |
| Rear (1) |
| Original Thickness | .35 (9) |
| Minimum Thickness (3) | .28 (7) |
| (1) Maximum lateral runout is .002" (.50 mm). (2) If using a brake lathe to machine rotor on vehicle, minimum thickness is 82" (20.8 mm). (3) If using a brake lathe to machine rotor on vehicle, minimum thickness is .31" (7.8 mm). |
| (1) | Maximum lateral runout is .002" (.50 mm). |
| (2) | If using a brake lathe to machine rotor on vehicle, minimum thickness is 82" (20.8 mm). |
| (3) | If using a brake lathe to machine rotor on vehicle, minimum thickness is .31" (7.8 mm). |
DISC BRAKE SPECIFICATIONS
DRUM BRAKE SPECIFICATIONS
| Application | In. (mm) |
|---|
| Drum Diameter |
| Original | 7.87 (200.0) |
| Maximum Finish Diameter | 7.93 (201.5) |
| Wheel Cylinder Bore Diameter | 0.75 (19.0) |
DRUM BRAKE SPECIFICATIONS
