HYDRAULIC SYSTEM BLEEDING
- Raise and support front of vehicle. With ignition off, turn steering wheel from lock to lock several times. Check fluid level. Add fluid as necessary. Repeat procedure until fluid level no longer decreases.
- Start engine and operate at idle. Turn steering wheel from lock to lock 5 times. Check fluid level. Add fluid as necessary. Continue procedure until fluid is clear of air bubbles and does not decrease in level.
POWER STEERING PUMP BELT
| Application | (1) Deflection In. (mm) | |
|---|---|---|
| 4-Cylinder | ||
| New Belt | .30-.35 (7.6-8.9) | |
| Used Belt | .32-.37 (8.1-9.4) | |
| V6 | ||
| New Belt | .24-.28 (6.1-7.1) | |
| Used Belt | .28-.31 (7.1-7.8) | |
| (1) Belt deflection is measured at midpoint between idler pulley and pump, with 22 lbs. (10 kg.) of pressure applied. | ||
| (1) | Belt deflection is measured at midpoint between idler pulley and pump, with 22 lbs. (10 kg.) of pressure applied. |
BELT ADJUSTMENT SPECIFICATIONS
STEERING GEAR
Note. Use a suitable container or rags to collect fluid when disconnecting pressure and return lines.
POWER STEERING PUMP
Note. Use a suitable container or rags to collect fluid when disconnecting pressure and return lines.
Note. (Scheme 2)for exploded views of rack and pinion steering gears.
Scheme 2
Note. (Scheme 3)for exploded views of power steering pumps.
