SPARK PLUG REMOVAL/INSTALLATION [LF]
| CAUTION | If a spark plug that is not as specified is installed, engine performance will be deteriorated. Install only the specified spark plug when replacing. |
- Remove the battery cover.
- Disconnect the negative battery cable. (See «BATTERY REMOVAL/INSTALLATION [LF]»(ref-244448-S25513985422006092400000) .)
- Remove the plug hole plate. (See «PLUG HOLE PLATE REMOVAL/INSTALLATION [LF]»(ref-244453-S34821156912006092400000) .)
- Remove the front suspension tower bar (joint). (See «FRONT SUSPENSION TOWER BAR REMOVAL/INSTALLATION»(ref-244475-S20579544822006092400000) .)
- Remove the ignition coils. (See «IGNITION COIL REMOVAL/INSTALLATION [LF]»(ref-244472-S13964549482006092400000) .)
- Remove the spark plugs using a plug-wrench.
- Install in the reverse order of removal. Tightening torque 10-14 N.m {1.1-1.4 kgf.m. 8-10 ft.lbf}
