Wheels and Tires Removal/Installation
- The removal and installation procedures for the wheel and tires are not mentioned in this section. Tighten reinstalled wheels to 89-117 N.m (66-86 ft.lbf).
Suspension Link Removal/Installation
- Tighten any part of the suspension that uses rubber bushings only after the vehicle has been lowered and unloaded. NOTE: Unloaded... Fuel tank is full. Engine coolant and engine oil are at specified levels. Spare tire, jack, and tools are in designated position.
Power Steering Components Removal/Installation
- If any power steering fluid line has been disconnected anytime during the procedure add ATF M -III or equivalent (e.g Dexron(R) III ), bleed the fluid lines and inspect for leakage after the procedure has been completed.