TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|
| Brake Hose-To-Caliper Bolt | 16-21 (22-28) |
| Caliper Bracket Bolt | 37-50 (50-68) |
| Caliper Lock Bolt (Front) | 58-65 (79-88) |
| Caliper Lock Bolt (Rear) | 26-28 (35-39) |
| Parking Brake Bolt | 14-18 (19-25) |
| Parking Brake Cable-To-Caliper Nut | 12-16 (16-22) |
| Power Brake Unit Mounting Nuts | 14-18 (19-24) |
| Proportioning Valve Tubing | 10-16 (13-22) |
| Wheel Lug Nut | 66-86 (89-117) |
| INCH Lbs. (N.m) |
| Adjustment Gauge Nut | 88-109 (9.9-15) |
| Bleeder Screw & Bleeder Cap | 53-78 (6-9) |
| Brakelight Switch Bolt | 122-156 (13.8-17.8) |
| Brake Pipe Fittings | 113-190 (12.8-21.5) |
| Master Cylinder Mounting Nut/Washer | 78-142 (9-16) |
| Master Cylinder Reservoir Screw | 9-13 (1.0-1.5) |
| Master Cylinder Stop Screw & "O" Ring (Without ABS) | 18-21 (2.0-2.4) |
| Master Cylinder Stop Screw & "O" Ring (With ABS) | 61-87 (7-10) |
| Proportioning Valve Bolt | 70-104 (8-12) |
| Proportioning Valve Nut | 87-141 (9.8-16) |
| Application | In. (mm) |
|---|
| Front Rotor (1) |
| Minimum Thickness (2) | .71 (18) |
| Rear Rotor (1) |
| Minimum Thickness (3) | .31 (8) |
| Front Or Rear Pads |
| Minimum Thickness | .08 (2) |
| (1) Maximum lateral runout is .002" (.05 mm). (2) If using a brake lathe to machine rotor on vehicle, minimum thickness is .74" (18.8 mm). (3) If using a brake lathe to machine rotor on vehicle, minimum thickness is .33" (8.4 mm). |
| (1) | Maximum lateral runout is .002" (.05 mm). |
| (2) | If using a brake lathe to machine rotor on vehicle, minimum thickness is .74" (18.8 mm). |
| (3) | If using a brake lathe to machine rotor on vehicle, minimum thickness is .33" (8.4 mm). |
DISC BRAKE SPECIFICATIONS
