TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|
| Backing Plate Bolts (Rear) |
| Protege |
| 1997 | 33-43 (45-58) |
| 1998 | 34-49 (46-66) |
| 626 | 37-50 (50-68) |
| Caliper Guide Bolts |
| Front Caliper |
| Millenia | 46-62 (63-84) |
| MPV | 62-69 (84-93) |
| Rear Caliper |
| MPV | 28-36 (38-49) |
| Millenia | 12-18 (16-24) |
| 626 | 26-29 (35-39) |
| Protege | 33-44 (45-60) |
| Caliper Mount Bracket Bolts |
| Front Caliper |
| Millenia | 75-101 (102-137) |
| MPV | 66-79 (89-107) |
| Rear Caliper |
| Millenia & MPV | 37-50 (50-68) |
| Protege | 33-44 (45-60) |
| 626 | 34-48 (46-66) |
| Front Caliper Mounting Bolt (Protege) | 30-36 (40-49) |
| Rear Axle Lock Nut (Millenia, Protege & 626) | 131-173 (177-235) |
| Wheel Lug Nut (1997) | 65-87 (88-118) |
| INCH Lbs. (N.m) |
| Wheel Cylinder Bleeder Screw (Protege) | 52-78 (5.9-8.8) |
| Wheel Cylinder Mounting Bolt (1997) | 88-108 (10-12) |
DISC BRAKE SPECIFICATIONS
| Application | In. (mm) |
|---|
| Millenia |
| Front (3) |
| Original Thickness | 1.10 (28) |
| Minimum Thickness (4) | 1.02 (26) |
| Rear (3) |
| Original Thickness | .37 (9.5) |
| Minimum Thickness (2) | .29 (7.5) |
| MPV |
| Front (1) |
| Original Thickness | 1.10 (28) |
| Minimum Thickness (4) | 1.02 (26) |
| Rear (1) |
| Original Thickness | .71 (18) |
| Minimum Thickness (5) | .63 (16) |
| 626 |
| Front (1) |
| Original Thickness | .94 (24) |
| Minimum Thickness (7) | .87 (22) |
| Rear (1) |
| Original Thickness | .39 (10) |
| Minimum Thickness (8) | .31 (8) |
| Protege |
| Front (9) |
| Original Thickness | .87 (22) |
| Minimum Thickness (6) | .79 (20) |
| Rear (9) |
| Original Thickness | .35 (9) |
| Minimum Thickness (10) | .28 (7) |
| (1) Maximum lateral runout is 0.004" (0.10 mm). (2) If using a brake lathe to machine rotor on vehicle, minimum thickness is 0.33" (8.4 mm). (3) Maximum lateral runout is 0.002" (0.05 mm). (4) If using a brake lathe to machine rotor on vehicle, minimum thickness is 1.06" (26.8 mm). (5) If using a brake lathe to machine rotor on vehicle, minimum thickness is 0.66" (16.8 mm). (6) If using a brake lathe to machine rotor on vehicle, minimum thickness is 0.82" (20.8 mm). (7) If using a brake lathe to machine rotor on vehicle, minimum thickness is 0.90" (22.8 mm). (8) If using a brake lathe to machine rotor on vehicle, minimum thickness is 0.35" (8.8 mm). (9) Maximum lateral runout is .002" (.50 mm). (10) If using a brake lathe to machine rotor on vehicle, minimum thickness is 0.31" (7.8 mm). |
| (1) | Maximum lateral runout is 0.004" (0.10 mm). |
| (2) | If using a brake lathe to machine rotor on vehicle, minimum thickness is 0.33" (8.4 mm). |
| (3) | Maximum lateral runout is 0.002" (0.05 mm). |
| (4) | If using a brake lathe to machine rotor on vehicle, minimum thickness is 1.06" (26.8 mm). |
| (5) | If using a brake lathe to machine rotor on vehicle, minimum thickness is 0.66" (16.8 mm). |
| (6) | If using a brake lathe to machine rotor on vehicle, minimum thickness is 0.82" (20.8 mm). |
| (7) | If using a brake lathe to machine rotor on vehicle, minimum thickness is 0.90" (22.8 mm). |
| (8) | If using a brake lathe to machine rotor on vehicle, minimum thickness is 0.35" (8.8 mm). |
| (9) | Maximum lateral runout is .002" (.50 mm). |
| (10) | If using a brake lathe to machine rotor on vehicle, minimum thickness is 0.31" (7.8 mm). |
DISC BRAKE SPECIFICATIONS
DRUM BRAKE SPECIFICATIONS
| Application | In. (mm) |
|---|
| 1997 Millenia & MPV |
| Parking Brake Drum Diameter |
| Original | 7.48 (190.0) |
| Maximum | 5.51 (191.0) |
| Protege |
| Drum Diameter |
| Original | 7.87 (200.0) |
| Maximum Finish Diameter | 7.93 (201.5) |
| 1997 Wheel Cylinder Bore Diameter | 0.75 (19.0) |
| 626 |
| Drum Diameter |
| Original | 9.00 (228.6) |
| Maximum Finish Diameter | 9.06 (230.1) |
| 1997 Wheel Cylinder Bore Diameter | 0.687 (17.46) |
DRUM BRAKE SPECIFICATIONS
