Home ReviewsRefund
Home/Mazda/CX-9/Mazda CX-9 I рестайлинг (2012-2016)/Repair manual/Accessory Drive Belts/Engine Mechanical [MZI-3.7]: Adjustments
Contents Section: Accessory Drive Belts All sections

Engine Mechanical [MZI-3.7]: Adjustments Mazda CX-9 I рестайлинг

Accessory Drive Belts

Valve Clearance Adjustment

  1. Follow the cylinder head gasket replacement procedure and remove the camshafts and camshaft sprocket as a single unit. (See «CYLINDER HEAD GASKET REPLACEMENT [MZI-3.7]»(ref-663015-S32789747152014101600000) .)
  2. Remove the tappet.
  3. Install an appropriate tappet based on the results of the valve clearance inspection. Selected tappet = Removed tappet thickness + Measured valve clearance - Standard valve clearance Standard valve clearance [Engine cold] IN: 0.150-0.250 mm {0.00591-0.00984 in} EX: 0.300-0.400 mm {0.0119-0.0157 in}
  4. Install in the reverse order of removal.

More articles — Engine Mechanical [MZI-3.7]