Home/Mazda/CX-5/Mazda CX-5 I (2011-2015)/Repair manual/Removal & Installation/Emission System: Other

Contents

Wiring diagrams Section: Removal & Installation

All sections

Emission System: Other Mazda CX-5 I

Removal & Installation 2 illustrations ~110 words

U.S.A. And CANADA

Note. The fuel shut-off valve cannot be removed as it is built into the fuel tank.

Remove the fuel tank. (See «FUEL TANK REMOVAL/INSTALLATION [SKYACTIV-G 2.0]»(ref-615403-S35472952672014051000000) ).

Note. The fuel shut-off valve cannot be removed and inspected as it is built into the fuel tank.

Perform the fuel tank inspection. (See «FUEL TANK INSPECTION [SKYACTIV-G 2.0]»(ref-615403-S15339048242014051000000) ). If there is any malfunction, replace the fuel tank (See «FUEL TANK REMOVAL/INSTALLATION [SKYACTIV-G 2.0]»(ref-615403-S35472952672014051000000) ).

Quick Release Connector Type and Position

CAUTION

Verify the type and location, and install/remove properly.

Identifying Quick Release Connector Type And Position (U.S.A. And Canada). Scheme 62

Scheme 62: Identifying Quick Release Connector Type And Position (U.S.A. And Canada)

Scheme 62: Identifying Quick Release Connector Type And Position (U.S.A. And Canada)

Identifying Quick Release Connector Type And Position (Except U.S.A. And Canada). Scheme 63

Scheme 63: Identifying Quick Release Connector Type And Position (Except U.S.A. And Canada)

Scheme 63: Identifying Quick Release Connector Type And Position (Except U.S.A. And Canada)