| Gap between front planetary gear pinion washer and planetary carrier | Maximum | 0.879 mm {0.0346 in} | |
| Gap between rear planetary gear pinion washer and planetary carrier | Maximum | 0.879 mm {0.0346 in} | |
| Gap between reduction planetary gear pinion washer and planetary carrier | Maximum | 0.820 mm {0.0322 in} | |
| Inner diameter of reduction planetary gear bush | Maximum | 35.095 mm {1.3816 in} | |
| Inner diameter of differential journal | Maximum | 30.046 mm {1.1829 in} | |
| Outer diameter of drive shaft (LH) journal | Minimum | 29.959 mm {1.1795 in} | |
| Outer diameter of joint shaft journal | Minimum | 29.944 mm {1.1789 in} | |
| Thickness of low clutch drive plate | Minimum | 1.475 mm {0.05808 in} | Drive plate size: Outer diameter approx. 159.1 mm {6.264 in} |
| Thickness of high clutch drive plate | Minimum | 1.375 mm {0.05414 in} | Drive plate size: Outer diameter approx. 116.8 mm {4.598 in} |
| Free length of high clutch springs and retainer component | Minimum | 25.4 mm {1.01 in} | Springs and retainer component size: Outer diameter approx. 79.5 mm {3.13 in} |
| Thickness of low and reverse brake drive plate | Minimum | 1.475 mm {0.05808 in} | Drive plate size: Outer diameter approx. 174.1 mm {6.854 in} |
| Thickness of 2-6 brake drive plate | Minimum | 1.475 mm {0.05808 in} | Drive plate size: Outer diameter approx. 171.9 mm {6.768 in} |
| Thickness of R-3-5 brake drive plate | Minimum | 1.635 mm {0.06438 in} | Drive plate size: Outer diameter approx. 169.4 mm {6.669 in} |
| Inner diameter of low clutch hub bush | Maximum | 31.270 mm {1.2311 in} | |
| Inner diameter of high clutch hub bush | Maximum | 18.038 mm {0.71015 in} | |
| Oil pump side clearance (inner rotor) | Maximum | 0.045 mm {0.0017 in} | |
| Oil pump side clearance (outer rotor) | Maximum | 0.050 mm {0.0019 in} | |
| Inner diameter of oil pump (oil pump cover) bush | Maximum | 44.006 mm {1.7325 in} | |
| Low clutch clearance | Specification | 1.400-1.600 mm {0.05512-0.06299 in} | |
| High clutch clearance | Specification | 1.300-1.500 mm {0.05119-0.05905 in} | |
| Low and reverse brake clearance | Specification | 1.650-1.850 mm {0.06497-0.07283 in} | |
| 2-6 brake clearance | Specification | 1.000-1.200 mm {0.03938-0.04724 in} | |
| R-3-5 brake clearance | Specification | 1.000-1.200 mm {0.03938-0.04724 in} | |
| Differential backlash | Specification | 0.030-0.150 mm {0.0012-0.0059 in} | |
| Secondary gear and output gear preload | Specification | 2.8-3.7 N.m {28.6-37.7 kgf.cm, 24.8-32.7 in.lbf} | |
| Ring gear and differential preload | Specification | 2.8-4.1 N.m {28.6-41.8 kgf.cm, 24.8-36.2 in.lbf} | |
| Total end play | Specification | 0.520-0.670 mm {0.0205-0.0263 in} | |
