TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|
| Backing Plate Bolts (Rear) |
| Protege & 626 | 37-50 (50-68) |
| MPV | 58-86 (79-116) |
| Caliper Guide Bolts |
| Front Caliper |
| Millenia | 46-62 (63-84) |
| MPV | 62-68 (84-93) |
| Rear Caliper |
| Millenia | 12-18 (16-24) |
| 626 | 26-29 (35-39) |
| Caliper Mount Bracket Bolts |
| Front Caliper |
| Millenia | 75-101 (102-137) |
| MPV | 66-80 (89-107) |
| Protege | 58-75 (79-101) |
| Rear Caliper |
| Millenia | 37-50 (50-68) |
| 626 | 34-48 (46-66) |
| Front Caliper Mounting Bolt |
| Protege | 30-39 (40-49) |
| Rear Axle Lock Nut |
| Millenia, MPV, Protege & 626 | 131-173 (177-235) |
| INCH Lbs. (N.m) |
| Wheel Cylinder Bleeder Screw |
| MPV & Protege | 52-78 (5.9-8.8) |
DISC BRAKE SPECIFICATIONS
| Application | In. (mm) |
|---|
| Millenia |
| Front Rotor (1) |
| Original Thickness | 1.10 (28) |
| Minimum Thickness (2) | 1.02 (26) |
| Rear Rotor (1) |
| Original Thickness | .37 (9.5) |
| Minimum Thickness (3) | .29 (7.5) |
| Front & Rear Disc Pad |
| Minimum Thickness | .08 (2.0) |
| MPV |
| Front Rotor (1) |
| Minimum Thickness (2) | 1.02 (26) |
| Front Disc Pad |
| Minimum Thickness | .08 (2.0) |
| 626 |
| Front Rotor (4) |
| Minimum Thickness (5) | .87 (22) |
| Front Disc Pad |
| Minimum Thickness | .04 (1.0) |
| Rear Rotor (4) |
| Minimum Thickness (6) | .31 (8) |
| Rear Disc Pad |
| Minimum Thickness | .04 (1.0) |
| Protege |
| Front Rotor |
| Minimum Thickness | .79 (20) |
| Front Disc Pad Minimum Thickness (7) |
| W/ZM (1.6L) Engine | .06 (1.5) |
| W/FP (1.8L) Engine | .08 (2.0) |
| (1) Maximum lateral runout is 0.002" (0.05 mm). (2) If using a brake lathe to machine rotor on vehicle, minimum thickness is 1.06" (26.8 mm). (3) If using a brake lathe to machine rotor on vehicle, minimum thickness is 0.33" (8.4 mm). (4) Maximum lateral runout is 0.004" (0.10 mm). (5) If using a brake lathe to machine rotor on vehicle, minimum thickness is 0.90" (22.8 mm). (6) If using a brake lathe to machine rotor on vehicle, minimum thickness is 0.35" (8.8 mm). (7) Maximum lateral runout is .002" (.05 mm). |
| (1) | Maximum lateral runout is 0.002" (0.05 mm). |
| (2) | If using a brake lathe to machine rotor on vehicle, minimum thickness is 1.06" (26.8 mm). |
| (3) | If using a brake lathe to machine rotor on vehicle, minimum thickness is 0.33" (8.4 mm). |
| (4) | Maximum lateral runout is 0.004" (0.10 mm). |
| (5) | If using a brake lathe to machine rotor on vehicle, minimum thickness is 0.90" (22.8 mm). |
| (6) | If using a brake lathe to machine rotor on vehicle, minimum thickness is 0.35" (8.8 mm). |
| (7) | Maximum lateral runout is .002" (.05 mm). |
DISC BRAKE SPECIFICATIONS
DRUM BRAKE SPECIFICATIONS
| Application | In. (mm) |
|---|
| Protege |
| Drum Diameter |
| Original | 7.87 (200.0) |
| Maximum Refinish Diameter | 7.93 (201.5) |
| 626 |
| Drum Diameter |
| Maximum Refinish Diameter | 9.06 (230.1) |
| MPV |
| Drum Diameter |
| Maximum Refinish Diameter | 10.05 (255.5) |
DRUM BRAKE SPECIFICATIONS
