Contents Wiring diagrams Section: Anti-Lock/traction Control All sections

Active Command Modes Procedure Mazda 626 GF

Active command mode allows devices such as relays or solenoids to be actuated through NGS scan tool. Turn ignition switch to OFF position. Ensure test equipment is properly attached. Program scan tool using the following steps

  1. Select VEHICLE & ENGINE SELECTION.
  2. Select NEW VEHICLE YEAR & MODEL (1999 or 2000).
  3. Select DIAGNOSTIC DATA LINK.
  4. Select ABS-ANTI LOCK BRAKE MODULE.
  5. Select ACTIVE COMMAND MODES.
  6. Select ABS OUTPUT CONTROL, INDICATOR LAMP CONTROL II or DESIRED ENGINE TORQUE.
  7. Turn ignition switch to ON position or start engine and allow to idle.
  8. Select appropriate active command mode. For active command modes, see «1999 ACTIVE COMMAND MODE DEFINITIONS»(ref-4523-S15161184592000081000000) or «2000 ACTIVE COMMAND MODE DEFINITIONS»(ref-4523-S22165412862000081000000) tables.
CommandDefinitionMode
ABS LMPABS Warning LightON/OFF
ENG TQR (1)Engine TorqueEngine Torque Amount
LF AVLeft Front Dump ValveON/OFF
LF EVLeft Front Isolation ValveON/OFF
LR AVLeft Rear Dump ValveON/OFF
LR EVLeft Rear Isolation ValveON/OFF
PMP RLYPump Motor RelayON/OFF
RF AVRight Front Dump ValveON/OFF
RF EVRight Front Isolation ValveON/OFF
RR AVRight Rear Dump ValveON/OFF
RR EVRight Rear Isolation ValveON/OFF
TCS LMP (1)TCS Indicator LightON/OFF
TCS OFF (1)TCS OFF LightON/OFF
(1) Pertains to TCS equipped models.
(1)Pertains to TCS equipped models.

1999 ACTIVE COMMAND MODE DEFINITIONS

CommandDefinitionMode
ABS LMPABS Warning LightON/OFF
CHK TRAC (1)Check Traction Control IndicatorON/OFF
ENG TQR (1)Engine Torque Reduction Signal OutputEngine Torque Amount
LF INLETLeft Front Isolation ValveON/OFF
LF OUTLETLeft Front Dump ValveON/OFF
LR INLETLeft Rear Isolation ValveON/OFF
LR OUTLETLeft Rear Dump ValveON/OFF
PMP MOTRHydraulic Pump MotorON/OFF
RF INLETRight Front Isolation ValveON/OFF
RF OUTLETRight Front Dump ValveON/OFF
RR INLETRight Rear Isolation ValveON/OFF
RR OUTLETRight Rear Dump ValveON/OFF
TCS LMP (1)TCS Indicator LightON/OFF
TRAC OFF (1)TCS OFF LightON/OFF
VPWR RLYValve Power RelayON/OFF
(1) Pertains to TCS equipped models.
(1)Pertains to TCS equipped models.

2000 ACTIVE COMMAND MODE DEFINITIONS