Contents Section: Suspension Front All sections

Technical Data - Suspension System: Other Mazda 6 GH рестайлинг

Standard tire and wheel

ItemSpecification
WheelSize16 x 6 1/2J17 x 7J18 x 7 1/2J
Inset(mm {in})55 {2.17}60 {2.4}
Pitch circle diameter(mm {in})114.3 {4.50}
MaterialSteelAluminum alloy
TireSizeP205/65R16 94HP215/55R17 93VP235/45R18 94W
Air pressure (kPa {psi})Front220 {32}
Rear220 {32}
Remaining tread(mm {in})1.6 {0.063} min.
Wheel and tireLug nut tightening torque(N.m {kgf.m, ft.lbf})88-118 {3.0-12, 65-87}
Wheel and tire runout (mm {in})Radial direction1.5 {0.059} max.
Lateral direction2.5 {0.10} max.2.0 {0.078} max.
Wheel imbalance(g {oz})Knock-type (2) : 9 {0.3} max.Adhesive-type (1) : 14 {0.49} max. Knock-type (2) : 9 {0.3} max.Adhesive-type (1) : 13 {0.46} max. Knock-type (2) : 8 {0.28} max.
(1) Total weight exceeds 160 g {5.65 oz}. (2) One balance weight: 60 g {2.12 oz} max. If the total weight exceeds 100 g {3.53 oz} on one side, rebalance after moving the tire around on the rim. Do not use three or more balance weights.
(1)Total weight exceeds 160 g {5.65 oz}.
(2)One balance weight: 60 g {2.12 oz} max. If the total weight exceeds 100 g {3.53 oz} on one side, rebalance after moving the tire around on the rim. Do not use three or more balance weights.

STANDARD TIRE AND WHEEL SPECIFICATIONS CHART

Temporary spare tire and wheel

ItemSpecification
WheelSize16x4T
Inset(mm {in})40 {1.6}
Pitch circle diameter(mm {in})114.3 {4.50}
MaterialSteel
TireSizeT115/70D16 92M
Air pressure(kPa {psi})420 {60}
Remaining tread(mm {in})1.6 {0.063} min.
Wheel and tireLug nut tightening torque(N.m {kgf.m, ft.lbf})88-118 {9.0-12, 65-87}

TEMPORARY SPARE TIRE AND WHEEL SPECIFICATIONS CHART