Wheel and Tire installation
- When installing the wheels and tires, tighten the wheel nuts in a criss-cross pattern to the following tightening torque.
Tightening torque
88-118 N.m {9.0-12 kgf.m, 65-87 ft.lbf}
Wheel Nuts Tightening Sequence. Scheme 7
Suspension Links Removal/Installation
Note. To prevent the bushings from being twisted or pinched, perform the procedures with no passengers or luggage aboard the vehicle.
- For the joint sections with rubber bushings, raise the vehicle using a lift and temporarily tighten the installation nuts and bolts. Afterwards, tighten to the specified torque with the wheels on the ground.
Power Steering Components Removal/Installation
- If any power steering fluid line has been disconnected anytime during the procedure, add Mazda Genuine ATF M-V or equivalent, bleed the fluid lines, and inspect for leakage after the procedure has been completed.