Home ReviewsRefund
Home/Mazda/6/Mazda 6 GH рестайлинг (2009-2013)/Repair manual/Lighting Systems: Removal & Installation/HEADLIGHT LEVELING SWITCH REMOVAL/INSTALLATION
Contents Section: Lighting Systems: Removal & Installation All sections

HEADLIGHT LEVELING SWITCH REMOVAL/INSTALLATION Mazda 6 GH рестайлинг

Lighting Systems: Removal & Installation 4 illustrations ~241 words

HEADLIGHT LEVELING SWITCH REMOVAL/INSTALLATION

  1. Disconnect the negative battery cable.
  2. Remove the following parts: Front scuff plate (driver-side) (See «FRONT SCUFF PLATE REMOVAL/INSTALLATION»(ref-448656-S42845656582012012000000) .) Front side trim (driver-side) (See «FRONT SIDE TRIM REMOVAL/INSTALLATION»(ref-448656-S24645152862012012000000) .) Upper panel (See «UPPER PANEL REMOVAL/INSTALLATION»(ref-448656-S41204061692012012000000) .) Decoration panel (driver-side) (See «DECORATION PANEL REMOVAL/INSTALLATION»(ref-448656-S12186936852012012000000) .) Hood release lever (See «HOOD LATCH AND RELEASE LEVER REMOVAL/INSTALLATION»(ref-448614-S41008846102012012000000) .) Meter hood (See «METER HOOD REMOVAL/INSTALLATION»(ref-448656-S09959257172012012000000) .) Lower panel (See «LOWER PANEL REMOVAL/INSTALLATION»(ref-448656-S04202039792012012000000) .)
  3. Remove the tabs.
  4. Remove the headlight leveling switch.
  5. Install in the reverse order of removal.

Scheme 58

Scheme 58
Scheme 58

Scheme 59

Scheme 59: HEADLIGHT LEVELING SWITCH INSPECTION
Scheme 59: HEADLIGHT LEVELING SWITCH INSPECTION

Scheme 60

Scheme 60
Scheme 60
  1. Remove the following parts: Front scuff plate (driver-side) (See «FRONT SCUFF PLATE REMOVAL/INSTALLATION»(ref-448656-S42845656582012012000000) .) Front side trim (driver-side) (See «FRONT SIDE TRIM REMOVAL/INSTALLATION»(ref-448656-S24645152862012012000000) .) Upper panel (See «UPPER PANEL REMOVAL/INSTALLATION»(ref-448656-S41204061692012012000000) .) Decoration panel (driver-side) (See «DECORATION PANEL REMOVAL/INSTALLATION»(ref-448656-S12186936852012012000000) .) Hood release lever (See «HOOD LATCH AND RELEASE LEVER REMOVAL/INSTALLATION»(ref-448614-S41008846102012012000000) .) Meter hood (See «METER HOOD REMOVAL/INSTALLATION»(ref-448656-S09959257172012012000000) .) Lower panel (driver-side) (See «LOWER PANEL REMOVAL/INSTALLATION»(ref-448656-S04202039792012012000000) .) Headlight leveling switch (See «HEADLIGHT LEVELING SWITCH REMOVAL/INSTALLATION»(ref-448651-S20286079402012012000000) .)
  2. Verify that the resistance between the headlight leveling switch terminals is as indicated in the table. If not as indicated in the table, or if the resistance is not within the specification, replace the headlight leveling switch.
  3. Apply battery voltage to headlight leveling switch terminal E, and connect terminal A to ground.
  4. Verify that the LED illuminates.
  1. If there is any malfunction, replace the headlight leveling switch.

Scheme 61

Scheme 61: AUTO LIGHT-OFF SYSTEM WIRING DIAGRAM
Scheme 61: AUTO LIGHT-OFF SYSTEM WIRING DIAGRAM