Home/Mazda/6/Mazda 6 GG facelift (2005-2008)/Repair manual/Ignition System/Ignition System (L3, Aj): Removal & Installation

Contents

Wiring diagrams Section: Ignition System

All sections

Ignition System (L3, Aj): Removal & Installation Mazda 6 GG facelift

Ignition System

SPARK PLUG REMOVAL/INSTALLATION [L3, AJ]

CAUTION

If a spark plug that is not as specified is installed, engine performance will be deteriorated install only the specified spark plug when replacing.

Disconnect the negative battery cable.
Remove the ignition coils-See «IGNITION COIL REMOVAL/INSTALLATION [L3, AJ]»(ref-244592-S31371436252006092500000) ).
Remove the spark plugs using a plug-wrench.
Install in the reverse order of removal. Tightening torque L3: 10-14 N.m {1.1-1.4 kgf.m, 8.0-10.3 ft.lbf} AJ: 9-20 N.m {91-204 kgf.cm, 79-177 in.lbf}