Front wheel alignment (Unloaded)*1
| Item | Fuel gauge indication |
|---|
| Empty | 1/4 | 1/2 | 3/4 | Full |
| Maximum steering angle [Tolerance ± 3°] | Inner | 40°30' ± 3° |
| Outer | 33°48' ± 3° |
| Total toe-in | Tire [Tolerance ± 4 {± 0.16}] | (mm {in}) | 2 {0.08} |
| Rim inner | 1 ± 3{0.04± 0.12} |
| (degree) | 0°11 ± 0°22' |
| Caster angle (1) (Reference value) [Tolerance ± 1°] | 2°55' | 2°56' | 2°58' | 3°00' | 3°01' |
| Camber angle (1) (Reference value) [Tolerance ± 1°] | 0°41' | 0°42' |
| Steering axis inclination (Reference value) | 13°57' | 13°59' |
| *1 : Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position. |
| (1) Difference between left and right must not exceed 1°30'. |
| (1) | Difference between left and right must not exceed 1°30'. |
FRONT WHEEL ALIGNMENT SPECIFICATION
Rear wheel alignment (Unloaded)*1
| Item | Fuel gauge indication |
|---|
| Empty | 1/4 | 1/2 | 3/4 | Full |
| Total toe-in | Tire | (mm {in}) | 3 {0.12} Allowable range: 0-5 {0-0.2} |
| Rim inner | 2 {0.08} Allowable range: 0-3 {0-0.12} |
| (degree) | 0°16' Allowable range: 0°00' ± 0°27' |
| Camber angle (1) (Reference value) [Tolerance ± 1°] | 1°11' | 1°12' | 1°15' | 1°16' | 1°18' |
| Thrust angle (Reference value) [Tolerance ± 0°48ø] | 0° |
| *1 : Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position. |
| (1) Difference between left and right must not exceed 1°30'. |
| (1) | Difference between left and right must not exceed 1°30'. |
REAR WHEEL ALIGNMENT SPECIFICATION
| Item | Specification |
|---|
| Front lower arm rotational torque | 1.0-4.9 N.m {11-49 kgf.cm, 9-43 in.lbf} Pull scale reading [10-49 N {1.1-4.9 kgf, 3-10 lbf}] |
| Front stabilizer control link ball joint rotational torque | 0.2-0.9 N.m {3-9 kgf.cm, 2-7 in.lbf} |
| Rear stabilizer control link ball joint rotational torque | 0.5-2.0 N.m {6-20 kgf.cm, 5-17 in.lbf} |
