Home ReviewsRefund
Home/Mazda/3/Mazda 3 BL рестайлинг (2011-2013)/Repair manual/Starter/Starting System [Skyactiv-G 2.0]: Removal & Installation
Contents Section: Starter All sections

Starting System [Skyactiv-G 2.0]: Removal & Installation Mazda 3 BL рестайлинг

Starter 1 illustration

STARTER REMOVAL/INSTALLATION [SKYACTIV-G 2.0]

WARNINGRemove and install all parts when the engine is cold, otherwise they can cause severe burns or serious injury. When the battery cables are connected, touching the vehicle body with starter terminal B will generate sparks. This can cause personal injury, fire, and damage to the electrical components. Always disconnect the negative battery cable before performing the following operation.

Scheme 64

Scheme 64
Scheme 64
  1. Remove the battery cover. (See «BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0]»(ref-520427-S28538867222013010300000).)
  2. Disconnect the negative battery cable. (See «BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0]»(ref-520427-S28538867222013010300000).)
  3. Remove the aerodynamic under cover No.2. (See «AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION»(ref-520448-S37186396192013010300000).)
  4. Remove in the order indicated in the table.
  5. Install in the reverse order of removal. (Scheme 64): Identifying Starter With Torque Specifications

More articles — Starting System [Skyactiv-G 2.0]