Engine Lubrication System [Skyactiv-G 2.0]: Overview Mazda 3 BL рестайлинг

Identifying Engine Lubrication System Components [SKYACTIV-G 2.0]. Scheme 52

Scheme 53

1. Position the vehicle on level ground.
2. Warm up the engine.
3. Stop the engine and allow at least 5 min before continuing.
4. Remove the dipstick, wipe it cleanly, and reinstall it fully.
5. Remove the dipstick and verify that the oil level is between the F and L marks on the dipstick. (Scheme 53): Inspecting Engine Oil Level If the oil level is below the L mark, add engine oil. If the oil level is above the F mark, penetration of fuel into the engine oil can be considered. Replace the engine oil.
6. Insert the oil level gauge completely until it attaches to the cylinder head cover.