Wheel and Tire Installation
- When installing the wheels and tires, tighten the wheel nuts in a criss-cross pattern to the following tightening torque.
Wheel Nuts Tightening Sequence. Scheme 1
Tightening torque
- 88-118 N.m {9.0-12 kgf.m, 65-87 ft.lbf}
Suspension Links Removal/Installation
- For the joint sections with rubber bushings, raise the vehicle using a lift, and then temporarily tighten the installation bolts and nuts. Lower the vehicle to the ground and tighten them completely with the specified torque.
- If any power steering fluid line has been disconnected, perform the following after installation of the power steering components. (See «POWER STEERING FLUID INSPECTION»(ref-520445-S27716686472013010300000) .) Power steering fluid amount inspection Power steering fluid leakage inspection Air bleeding