Home ReviewsRefund
Home/Mazda/3/Mazda 3 BL (2008-2011)/Repair manual/Steering/General Procedures (Steering System): Other
Contents Wiring diagrams Section: Steering All sections

General Procedures (Steering System): Other Mazda 3 BL

Steering

Connector Disconnection

  1. Disconnect the negative battery cable before performing any work that requires handling of connectors. (See «BATTERY REMOVAL/INSTALLATION [LF, L3]»(ref-345206-S36173522052009102000000) .) (See «BATTERY REMOVAL/INSTALLATION [L3 WITH TC]»(ref-345228-S02486648752009102000000) .)

Electro Hydraulic Power Assist Steering (EHPAS) Related Parts

WARNINGIf the configuration procedure is not completed, the EHPAS will not operate properly and it might cause an unexpected accident. Therefore, when replacing or removing the electric power steering oil pump, make sure to perform the configuration procedure to ensure the proper EHPAS operation.
  1. Make sure that there are no DTCs in the EHPAS memory after working on EHPAS related parts. If there are any codes in the memory, clear them.
  2. When replacing or removing the electric power steering oil pump, perform the configuration procedures. (See «ELECTRO HYDRAULIC POWER ASSIST STEERING (EHPAS) CONTROL MODULE CONFIGURATION [LF, L3]»(ref-345219-S35083982712009102000000) .)

More articles — General Procedures (Steering System)