SPARK PLUG REMOVAL/INSTALLATION [LF, L3]
| CAUTION | If a spark plug that is not as specified is installed, engine performance will be deteriorated. Install only the specified spark plug when replacing. |
- Remove the battery cover. (See «BATTERY REMOVAL/INSTALLATION [LF, L3]»(ref-345206-S36173522052009102000000) .)
- Disconnect the negative battery cable.
- Remove the plug hole plate. (See «PLUG HOLE PLATE REMOVAL/INSTALLATION [LF, L3]»(ref-345205-S31861420912009102000000) .)
- Remove the ignition coils. (See «IGNITION COIL REMOVAL/INSTALLATION [LF, L3]»(ref-345207-S39844696482009102000000) ).
- Remove the spark plugs using a plug-wrench.
- Install in the reverse order of removal. Tightening torque 10-14 N.m {1.1-1.4 kgf.m, 8-10 ft.lbf}
