TORQUE SPECIFICATIONS (COUGAR & THUNDERBIRD)
| Application | Ft. Lbs. (N.m) |
|---|
| Booster-To-Firewall Nuts | 14-25 (19-34) |
| Brake Hose-To-Caliper | 30-44 (41-60) |
| Front Caliper Locating Pins | 19-25 (26-34) |
| Master Cylinder-To-Booster Nuts | 14-25 (19-34) |
| Rear Anchor Plate Retaining Bolt | 45-65 (61-88) |
| Rear Slider Pin Pinch Bolt | 23-26 (31-35) |
| Rear Axle Hub Nut | 188-254 (255-345) |
| Wheel Lug Nuts | 80-104 (108-141) |
TORQUE SPECIFICATIONS (COUGAR & THUNDERBIRD)
TORQUE SPECIFICATIONS (MARK VII)
| Application | Ft. Lbs. (N.m) |
|---|
| Booster-To-Firewall Nuts | 14-24 (19-33) |
| Brake Hose-To-Caliper | 30-40 (41-54) |
| Front Caliper Locating Pins | 46-65 (62-88) |
| Front Hub Nut | 188-254 (255-355) |
| Master Cylinder-To-Booster Nuts | 16-21 (22-28) |
| Press Control Valve-To-Master Cylinder | 10-18 (14-24) |
| Rear Caliper Locating Pins | 19-26 (26-35) |
| Wheel Lug Nuts | 85-104 (115-141) |
TORQUE SPECIFICATIONS (MARK VII)
TORQUE SPECIFICATIONS (MUSTANG)
| Application | Ft. Lbs. (N.m) |
|---|
| Booster-To-Firewall Nuts | 14-24 (19-33) |
| Brake Hose-To-Caliper |
| 2.3L | 20-30 (27-41) |
| 5.0L | 10-18 (14-24) |
| Front Caliper Locating Pins | 46-65 (62-88) |
| Master Cylinder-To-Booster Nuts | 14-24 (19-33) |
| Wheel Lug Nuts | 85-104 (115-141) |
TORQUE SPECIFICATIONS (MUSTANG)
DISC BRAKE SPECIFICATIONS (COUGAR & THUNDERBIRD)
| Application | In. (mm) |
|---|
| Front |
| Diameter | 10.87 (276.0) |
| Lateral Runout | .003 (.08) |
| Parallelism | .0005(.013) |
| Original Thickness | 1.02 (26.0) |
| Minimum Refinish Thickness | (1) .935 (23.75) |
| Rear |
| Diameter | 10.16 (258.0) |
| Lateral Runout | .003 (.08) |
| Parallelism | .0005 (.013) |
| Original Thickness | .945 (24.00) |
| Minimum Refinish Thickness | (1) .900 (22.75) |
| (1) Minimum refinish specification is also marked on brake disc. |
| (1) | Minimum refinish specification is also marked on brake disc. |
DISC BRAKE SPECIFICATIONS (COUGAR & THUNDERBIRD)
DISC BRAKE SPECIFICATIONS (MARK VII)
| Application | In. (mm) |
|---|
| Front |
| Diameter | 10.91 (277.0) |
| Lateral Runout | .003 (.08) |
| Parallelism | .0005(.013) |
| Original Thickness | 1.03 (26.2) |
| Minimum Refinish Thickness | (1) .972 (24.68) |
| Rear |
| Diameter | 10.51 (267.0) |
| Lateral Runout | .002 (.05) |
| Parallelism | .0005 (.013) |
| Original Thickness | .945 (24.00) |
| Minimum Refinish Thickness | (1) .900 (22.75) |
| (1) Minimum refinish specification is also marked on brake disc. |
| (1) | Minimum refinish specification is also marked on brake disc. |
DISC BRAKE SPECIFICATIONS (MARK VII)
DISC BRAKE SPECIFICATIONS (MUSTANG)
| Application | In. (mm) |
|---|
| Diameter | 10.91 (277.0) |
| Lateral Runout | .003 (.08) |
| Parallelism | .0005 (.013) |
| Original Thickness | 1.02 (26.0) |
| Minimum Refinish Thickness | (1) .972 (24.68) |
| (1) Minimum refinish specification is also marked on brake disc. |
| (1) | Minimum refinish specification is also marked on brake disc. |
DISC BRAKE SPECIFICATIONS (MUSTANG)
DRUM BRAKE SPECIFICATIONS (COUGAR & THUNDERBIRD)
| Application | In. (mm) |
|---|
| Drum Diameter |
| Original | 9.80 (250.0) |
| Maximum Refinish Diameter | 9.90 (251.6) |
| Drum Width | 1.77 (45.0) |
| Maximum Drum Runout | .007 (.18) |
| Wheel Cylinder Diameter | 1.00 (24.5) |
DRUM BRAKE SPECIFICATIONS (COUGAR & THUNDERBIRD)
DRUM BRAKE SPECIFICATIONS (MUSTANG)
| Application | In. (mm) |
|---|
| Drum Diameter |
| Original | 9.0 (204.7) |
| Maximum Refinish Diameter | 9.06 (230.1) |
| Drum Width | 1.34 (34.0) |
| Maximum Drum Runout | .005 (.13) |
| Wheel Cylinder Diameter | .75 (19.1) |
DRUM BRAKE SPECIFICATIONS (MUSTANG)
