FORD CALIBRATION LABELS
Ford Motor Co. uses an emission calibration label in addition to the emission control label. The emission calibration label is located on either the engine valve cover, the driver-side door or the left door post pillar.
The calibration label identifies the engine year, calibration design and design revision level. These numbers are also used to identify service parts and engine specifications that make up the emission system designed for the vehicle. (Scheme 32), (Scheme 33), (Scheme 35) and see scheme 6.
Scheme 32
Scheme 33
Scheme 34
Scheme 35
Note. The following emission control visual inspection procedures should be used as a guide only. When performing a visual inspection, always follow your state's recommended inspection procedures.
A visual inspection is made to determine if any required emission control devices are missing, modified or disconnected. Missing, modified or disconnected systems must be made fully operational before a vehicle can be certified.